Iron Craft Challenge #17 – “Finding the Tree” Ornaments

For this Iron Craft challenge we were asked to create something that could be entered into a competition at the state fair. We were given the competition guides for the MN State Fair as our guide. I decided to do the new Christmas Ornament Contest. (Actually, I would have entered in this competition if I had known about it more than a week ahead of time. Next year I need to read the guides better!) Here are the guidelines…

“The Chippewa National Forest has been selected to provide the 2014 US Capitol Christmas Tree to Washinton, D.C. this year! A tree will be selected from the Forest, and will eventually end up on the front lawn of the US Capitol Building. We will send 10,000 ornaments along the way to decorate the tree – these will be made by local school children and community groups. We are looking for Minnesota artists interested in creating a one-of-a-kind ornament representing the Capitol Christmas Tree from Minnesota.
Ornaments must be 3-Dimensional, less than 12” high and weigh less than 1/2 pound and highlight one
or more of the design elements in the 2014 Chippewa National Forest logo. These include:
● A Spruce or Balsam Fir tree
● Bald Eagle
● Ojibwe floral beadwork design
● Minnesota and/or Chippewa National themes, including lakes/river, heritage, ecosystems.”

I ended up making two ornaments…
Iron Craft Challenge #17 - "Finding the Tree" Ornaments

Iron Craft Challenge #17 - "Finding the Tree" Ornaments
I was going with a Minnesota heritage theme of going out into the woods and finding the perfect Christmas tree. I used plain Christmas balls and turned them into snow globe type scenes.

“Finding the Tree” Ornaments

Supplies:

  • clear glass or plastic Christmas ball (I used a medium and a large one)
  • small bottle brush trees, I needed three for my two ornaments (on one I only used the base)
  • tweezers, long and thin enough to fit in the Christmas ball
  • tacky or other thick glue
  • scissors or wire cutters
  • figurines for train sets (I used HO scale and they all fit through the opening in the Christmas balls.)
  • white glitter
  • small paintbrush (optional)

1. Cut the base off two of the trees. Chose the figures for each ornament and glue them to the bases. Let dry.
Iron Craft Challenge #17 - "Finding the Tree" Ornaments
2. Put a dab of glue on the bottom the tree still on a base. Use the tweezers to place it in one of the balls. Let dry. It helps to stand the ornament in something to keep it upright.
Iron Craft Challenge #17 - "Finding the Tree" Ornaments
3. Once the figure for the standing tree ball is dry, put a dab of glue on the bottom of the base. Use the tweezers to place him in the ball. Let dry.
Iron Craft Challenge #17 - "Finding the Tree" Ornaments
4. Do the same thing with the second figure in the second ball.

5. Pour white glitter into both balls covering the bases.

6. Add a tree without a base to the second ball. I tucked the stem under his arm to make it look like he was dragging the tree. I took a bit of work with the tweezers and a paintbrush to get it just right.
Iron Craft Challenge #17 - "Finding the Tree" Ornaments
A small paintbrush can help remove excess glitter from the sides.

If you are not reading this post in a feed reader or at http://justcraftyenough.com then the site you are reading is illegally publishing copyrighted material. Contact us at jcraftyenough AT gmail DOT COM. All patterns, text and photographs in this post are the original creations & property of the author unless otherwise noted.
© 2005 – 2014 Kathy Lewinski & Susan Cornish
10 years ago by in Challenges , Christmas , Craft Projects , Crafts , Holiday , Iron Craft , Projects | You can follow any responses to this entry through the RSS feed. You can leave a response, or trackback from your own site.
7 Comments to Iron Craft Challenge #17 – “Finding the Tree” Ornaments
    • DrRuss
    • This is wonderful. I adore them. I can only imagine how fussy this had to be when working with such a small opening. Actually, I am pretty jealous that you have tweezers this small. Another amazing project.

      • Kat
      • That is why they are so simple, I couldn’t imagine trying to add a second person or something! I just used my regular tweezers, which probably isn’t the best for them.

Leave a Reply to Kat
Cancel reply

* Required