Iron Craft ’13 Challenge 22 – Lit Frosted Ball Wreath

For this Iron Craft challenge we were to make something using light or pertaining to light. I had an idea for a modern wreath for my mantel. The original idea was to cover a metal wreath form with clear glass balls and light it up from behind with Christmas lights. The more I thought about it, the more tweaking the idea needed.

My wreath form was green (I should have bought a silver or white one. I did paint my white but a lot of the paint scraped off while I was working with it.) and I didn’t want the green showing through the clear glass balls. Plus, all the light cord was going to show through and I know never be neat enough for me. The solution was to find frosted balls that would still let light through and yet hide the works behind.

Well, that sounds simple right? Ha! Try finding plain frosted balls. (Target did have some, but I would have had to buy them as part of a set with other colors and only in one size.) The solution was frost clear balls myself. I picked up different size clear balls at Target and for 50% off at Michael’s. (At normal price Target is cheaper than Michael’s, but has less size options.) I had some glass etching solution, but that stuff is pretty intense requiring the use of gloves, a mask and ventilation. What I found instead was Martha Stewart’s Frost Etching Effect. Here are the results…
Iron Craft '13 Challenge #22 - Lit Frosted Ball Wreath
I love it. It’s clean and modern, just what I wanted. Plus, surprisingly easier to make than I thought, once I got the hang of it.
Iron Craft '13 Challenge #22 - Lit Frosted Ball Wreath
Some notes on the Frost Etching Effect. It gave just the slightly opaque look I was going for, but it took a little trial and error to get it right. You can use it as is or tint it with acrylic paint. On its own it was very light, I found a little paint helped a lot, but if you use too much it’ll just look like paint not frost. I tried both white and silver paint and found the silver gave the nicest result. (I may just have gone to heavy with the white.) Then the trick was getting it on the glass balls. I tried sponges, dabbers, paintbrushes and a soft cloth, all gave pretty streaky coverage. Finally, I tried my finger, that was the way to go. It will look a little streaky especially on the first coat, but a second coat will dry pretty smoothly. The trick is to make sure to get a thin, even coat and let it dry completely before doing the second. Here is the difference between one coat and two. You can see coat two is less streaky and less see-through.
Iron Craft '13 Challenge #33 - Lit Frosted Ball Wreath
Because you are not really etching the glass, this frosting can scrape off especially when rubbing two frosting balls together. So don’t mess around with them too much when gluing them on the wreath form.

Lit Frosted Ball Wreath

Supplies:

  • Clear glass Christmas balls (I used 14 55mm balls and 13 larger balls, there was no size listed on the package. I wish I could have also found tinier ones) or, if you can find them, pre-frosted balls (this wreath is a snap if you can find these)
  • Martha Stewart Frost Etching Effect (skip if you bought pre-frosted balls)
  • Silver, white or grey acrylic paint (skip if you bought pre-frosted balls)
  • Metal wreath form in silver or white, mine was 12″
  • String of white Christmas light (try to get a string with a white cord). I used a string of 60.
  • Zip ties, yarn, string or something else to tie the lights to the wreath form
  • Hot glue sticks

Tools:

  • Hot glue gun

1. (If you have bought pre-frosted balls you can skip to step 2.) Frost the balls – Mix about 2 teaspoons or so of the Frost Etching Effect with a few drops of the acrylic paint. I only made a little at a time because I didn’t want it to dry out. It goes a long way since you are doing such thin coats.
Iron Craft '13 Challenge #22 - Lit Frosted Ball Wreath
You really want just a little of the color or it get looks just like paint when you use it, not frost. Stir together.
Iron Craft '13 Challenge #22 - Lit Frosted Ball Wreath
Coat the balls with a thin coat of the frost/paint using your finger. Let the first coat completely dry. It is important to let it dry completely or you”ll just wipe it off when you apply the second coat. Apply a thin second coat and let dry again. You can add more coats it you want, but two seemed good enough to not see through.

2. Put the lights in the wreath frame – I did this by securing the ends of the light sting to the frame with a twist tie. Then I just filled in the rest of the frame, tying it in a few places.
Iron Craft '13 Challenge #22 - Lit Frosted Ball Wreath
The frame is curved and you are putting the lights inside the curve.

3. Hot glue the balls to the frame – Take the metal ends off the balls if you haven’t already. Work around the frame mixing up the size of the balls. Glue the balls to the wreath form and each other. Be generous with the glue.
Iron Craft '13 Challenge #22 - Lit Frosted Ball Wreath Iron Craft '13 Challenge #33 - Lit Frosted Ball Wreath
Be careful not to touch the hot tip of the glue gun to the glass balls, I had one break from the heat. Fill the whole wreath and you are done. Hang and enjoy!

If you are not reading this post in a feed reader or at http://justcraftyenough.com then the site you are reading is illegally publishing copyrighted material. Contact us at justcraftyenough AT yahoo DOT COM. All patterns, text and photographs in this post are the original creations & property of the author unless otherwise noted.
© 2005 – 2013 Kathy Lewinski & Susan Cornish
10 years ago by in Challenges , Christmas , Craft Projects , Crafts , Holiday , Iron Craft , Projects | You can follow any responses to this entry through the RSS feed. You can leave a response, or trackback from your own site.
42 Comments to Iron Craft ’13 Challenge 22 – Lit Frosted Ball Wreath
  1. Pingback: DIY Frosted Ball Wreath For Winter Decor | Shelterness

  2. Pingback: Amazing DIY Frosted Ball Wreath

  3. Pingback: Top 10 Embellished DIY Christmas Lights - Top Inspired

      • Kat
      • Terry – I didn’t use battery operated lights, mine just plug in & I have an extension cord going from the wreath. (I was able to hide the cord in my decor.) You could easily use battery operated ones, but I have not found any that last longer than a couple hours and that drives me crazy 😉

      • Kat
      • The frost medium was pretty thick, so I don’t think it would swirl very easily. You could try watering it down & see how that works.

      • Kat
      • You could try, my worry would be it would be hard to get the balls to stay tight together. Also, I would think they would move around a bit if they were tied on. Glued they really stay in place. If you try it let us know.

    • Diane
    • I have a couple questions: 1. you took the silver part out of the balls and did not use it? Next: 2 you didn’t put any of the ball on the lights inside right, just on top of?

      • Kat
      • Yes, I did not use the silver or hanging part of the balls, I wanted the wreath to be all white. No, I didn’t put any light into the balls themselves. Since the lights were wrapped around the wreath form it was easier not to worry about trying to line those up & it really didn’t need it.

    • jean
    • If you have trouble finding frosted balls, why not try ping bong balls. Just put a small X on the printed side of the balls with a knife or exacto knife.

  4. Pingback: 21 DIY Christmas Wreaths Filled With Holiday Cheer

  5. Pingback: 21 DIY Christmas Wreaths Filled With Holiday Cheer | Prepper's Survival Homestead

    • NameJeanne Simpson
    • The only thing I’d question about this: I used hot glue to repair a lampshade, with the lamp on, the glue would melt. Will this not happen when the lights are on, turning the balls loose?

      • Kat
      • I haven’t had the problem at all, Perhaps the Christmas lights don’t get hot enough especially if you use LEDs. You could probably also use another glue that will hold glass together quickly and securely like a silicone.

  6. Pingback: 50 IDEIAS DE NATAL - Amanda que fez

  7. Pingback: 28 guirlandas para pendurar em casa neste Natal | CASA.COM.BR

  8. Pingback: Faça você mesmo: 88 ideias para ter um Natal inesquecível | CASA.COM.BR

  9. Pingback: 30+ Festive DIY Christmas Wreath - Listing More

  10. Pingback: Faça você mesmo: 88 ideias para ter um Natal inesquecível – Morada Móveis

  11. Pingback: 88 Ideias para decoração de Natal que você mesmo pode fazer – Jornal Cidade

  12. Pingback: 10+ DIY Christmas Wreaths for Front Door

  13. Pingback: 12 DIY Christmas Wreaths for Front Door

  14. Pingback: Especial Natal 🎄|DIY: Ideias Para Ter Um Natal Inesquecível – Beijos, Blues & Poesia ❤

  15. Pingback: Decoração de Natal: 88 ideias faça você mesmo para um Natal inesquecível - Duall Shop

  16. Pingback: Decoração de Natal: 88 ideias faça você mesmo para um Natal inesquecível - Decora More

  17. Pingback: Decoração de Natal: 88 ideias faça você mesmo para um Natal inesquecível - More Duall

  18. Pingback: Decoração de Natal: 88 ideias faça você mesmo para um Natal inesquecível - More Decora

  19. Pingback: Decoração de Natal: 88 ideias faça você mesmo para um Natal inesquecível - More Shop

  20. Pingback: Decoração de Natal: 88 ideias faça você mesmo para um Natal inesquecível - (dezembro 2022) Lar Life

Leave a Reply to Susi
Cancel reply

* Required